91���˰涶��

What are gas sensors used for?

Gas sensors are widely used for different purposes. Most commonly, they are used for health and safety purposes, such as to detect dangerous levels of toxic gases, including carbon monoxide (CO) and NO₂. Levels of NO₂ can be particularly high in areas with many sources of emissions, including busy roads, factories, and power plants.

“Other gas sensors include those in car engines, which detect oxygen levels,” says Prof. Chu. “This is because you need to tune the ratio of the fuel and oxygen to get a good efficiency.

“They are also used in a healthcare settings, such as to identify the composition of people’s breath.” 

However, there are some limitations to these existing sensors, including size and the high energy consumption they are required to run, as well as limited sensitivity and degradation of the sensor over time.

“Current gas sensors can be complex, which also means they can be quite expensive,” says Prof. Chu. “For example, the oxygen sensor in our glove boxes can cost $US5000 each.”

To address these challenges, there is a need for continuing research and development to improve their accuracy, reliability, and versatility. So, Prof. Chu and his team set out to create a lightweight, affordable sensor to detect NO₂.��

2D-printing as a sustainable production technique

The team started their investigation with a well-known, promising compound that has previously been used for sensing applications due to its sustainability and biocompatibility: molybdenum disulfide (MoS₂).

“My research group has been researching the potential of MoS₂ as a sensing device for over eight years,” says Prof. Chu.��

“There are two different subgroups of MoS₂, one that is more conductive – meaning it is better at conducting electricity – and one that is less conductive.  

“We found that combining the two subgroups makes the best gas sensor compound, keeping it conductive – which is essential for these sensors – while also sensitive to external gas composition.” 

After combining the two subtypes of MoS₂, the team made several additional changes to the soluble compound. “For example, we also added nitrogen to the soluble mixture, to increase its sensitivity,” says Prof. Chu.  

When an NO₂ molecule scratches the surface, the MoS₂ compound has the capacity to absorb that molecule. "In capturing the NO₂ molecules, the surface electrical resistance is altered, and we can then register a change of the conductivity at room temperature.”

What’s even more unique about this mini sensor is that it has been constructed using 2D-printing technology.��

“2D-printing technology is similar to 3D-printing, except that it happens on a very fine surface to minimize the sensor production costs,” says Prof. Chu. “The process involves having small nodules which inject soluble materials onto a flat surface.”

The team used this 2D-printing to build two components of the sensor. “We actually print out the conductive nano materials using 2D-printing, which act as our sensor electrodes,” says Prof. Chu. “We then print the sensor material itself, which is the MoS₂ that we developed in the lab.”

Promising initial results

Existing commercial gas sensors encounter critical issues that limit their development and various applications due to their high energy consumption, low accuracy, slow real-time monitoring, and lack of ability to detect trace concentration.

“The principle of the current gas sensors on the market is that they have to be heated up, sometimes up to 300°C, otherwise they cannot detect,” says Prof. Chu. “Because our device can work at room temperature, it requires far less energy.”

Testing in the lab found that their MoS₂ based sensor had a high sensitivity of 10ppm NO₂ – this means the sensor is able to successfully detect 10 particles of NO₂ in 1 million gas particles.��

While NO₂ exists naturally in very small quantities in the air, the main source is human activity, such as from burning coal, and high levels of the gas are a danger to human life. Concentration of and more than 200ppm is considered an immediate danger to life.  

Next-gen gas sensing technology

Thanks to its miniature size and low energy consumption, the wearable device has a wide scope of uses, particularly when it comes to safely measuring gas concentrations in different working environments.��

“We hope to work on designing wearable sensing devices for monitoring air quality, such as for industrial safe systems at mining sites, or in warehouses, where concentrations of NO₂ can be particularly high,” says Prof. Chu.��

While this development represents a big step in next-generation gas sensor technology, Prof. Chu explains that there are still improvements to be made, such as testing sensitivity to other gases, which in turn, will broaden the scope of its potential uses.��

“We have limited access to wider range of gases, such as volatile organic compounds or other toxic gases, like ozone³ or CO, due to safety issues,” he says. “It would be great if we could test a broader range of gases to evaluate how our sensor can work towards other target gases.”