91成人版抖音

Professor Sophie Primig

Professor Sophie Primig

Professor
  • Graduate Certificate of Management (2021), Australian Graduate School of Management, UNSW Sydney
  • Graduate Certificate of University Learning and Teaching (2018), UNSW Sydney
  • Ph.D. in Mining and Metallurgical Engineering (2012), Montanuniversitaet Leoben (Austria)
  • M.Eng. in Materials Science and Engineering (2008), Montanuniversitaet Leoben (Austria)
Science
School of Materials Science & Engineering
  • Alcoa Distinguished Professor, Apr 2024 - current
  • Professor, School of Materials Science and Engineering, UNSW Sydney, Australia, 2023 - current
  • UNSW Scientia Program, 2019 - 2022
  • ARC DECRA Fellow, 2018 - 2020
  • Lecturer, Senior Lecturer, Associate Professor, School of Materials Science and Engineering, UNSW Sydney, Australia, 2015 - 2022
  • Senior Scientist and Head of the 鈥楬igh Performance Materials and Steels鈥 group, Department of Physical Metallurgy and Materials Testing, Montanuniversitaet Leoben (Austria), 2013 - 2015
  • Postdoctoral Fellow, Christian Doppler Laboratory 'Early Stages of Precipitation', Montanuniversitaet Leoben (Austria), 2012 - 2013
Phone
+61 2 9385-5284
Location
Room 346, Hilmer Building, E10 Kensington, New South Wales, 2033 Australia
  • Book Chapters | 2021
    Primig S; Theska F; Haghdadi N, 2021, 'Electron Microscopy Methods', in Encyclopedia of Materials: Metals and Alloys, pp. 203 - 211,
  • Journal articles | 2025
    Theska F; Schulz B; Lison-Pick M; Street SR; Primig S, 2025, 'Precipitation-controlled grain boundary engineering in a cast & wrought Ni-based superalloy', Journal of Alloys and Compounds, 1010, pp. 177131 - 177131,
    Journal articles | 2024
    Adomako NK; Haghdadi N; Liao X; Ringer SP; Primig S, 2024, 'Thermal cycle induced solid-state phase evolution in IN718 during additive manufacturing: A physical simulation study', Journal of Alloys and Compounds, 976, pp. 173181,
    Journal articles | 2024
    Adomako NK; Haghdadi N; Primig S, 2024, 'Advancing the understanding of metal additive manufacturing via physical simulation and in situ transmission electron microscopy: a viewpoint', Journal of Materials Science, 59, pp. 20221 - 20240,
    Journal articles | 2024
    Adomako NK; Haines M; Haghdadi N; Primig S, 2024, 'On the role of the preheat temperature in electron-beam powder bed fusion processed IN718', Additive Manufacturing Letters, 11, pp. 100238 - 100238,
    Journal articles | 2024
    Al-Lami J; Theska F; Ahuactzin-Garcia E; Primig S; Davies C; Pham MS, 2024, 'On the origin of thermal dependence of 3D printed Inconel 718: Roles of atom clustering', Applied Materials Today, 40, pp. 102414 - 102414,
    Journal articles | 2024
    Buerstmayr R; Schulz B; Povoden-Karadeniz E; Kozeschnik E; Lison-Pick M; Primig S, 2024, 'Improved Thermodynamic Descriptions of Carbides in Ni-Based Superalloys', JOM, 76, pp. 2283 - 2301,
    Journal articles | 2024
    Farabi E; Haghdadi N; Czettl C; Pachlhofer J; Rohrer GS; Ringer SP; Primig S, 2024, 'On the fcc to hcp transformation in a Co-Ru alloy: Variant selection and intervariant boundary character', Scripta Materialia, 248, pp. 116127 - 116127,
    Journal articles | 2024
    Farabi E; Rielli VV; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S, 2024, 'New insights into the kinetics of dynamic and post-dynamic softening in Alloy 718 engine disks', Materials and Design, 247, pp. 113423 - 113423,
    Journal articles | 2024
    Farabi E; Rielli VV; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Ringer SP; Primig S; Vieira Rielli V, 2024, 'Advancing structure 鈭 property homogeneity in forged Alloy 718 engine disks: A pathway towards enhanced performance', Materials and Design, 242, pp. 112987,
    Journal articles | 2024
    Haghdadi N; Breen AJ; Chen H; Theska F; Davids WJ; Liao XZ; Rohrer GS; Ringer SP; Primig S, 2024, 'New insights into the character of austenite-ferrite boundaries in an additively manufactured duplex stainless steel', Scripta Materialia, 245, pp. 116049,
    Journal articles | 2024
    Haines MP; Moyle MS; Rielli VV; Haghdadi N; Primig S; Vieira Rielli V, 2024, 'Site-specific Cu clustering and precipitation in laser powder-bed fusion 17鈥4 PH stainless steel', Scripta Materialia, 241, pp. 115891,
    Journal articles | 2024
    He XY; Wang H; Liao XZ; Ringer SP; Haghdadi N; Primig S, 2024, 'Nano-twining and deformation-induced martensitic transformation in a duplex stainless steel 2205 fabricated by laser powder bed fusion', Additive Manufacturing, 84, pp. 104110,
    Journal articles | 2024
    Lim B; Nomoto K; Clarke AJ; Babu SS; Primig S; Liao X; Breen AJ; Ringer SP, 2024, 'Corrigendum to 鈥淥n the interplay of internal voids, mechanical properties, and residual stresses in additively manufactured Haynes 282鈥 [Addit. Manuf. 75 (2023) 103749] (Additive Manufacturing (2023) 75, (S2214860423003627), (10.1016/j.addma.2023.103749))', Additive Manufacturing, 79,
    Journal articles | 2024
    Luo M; Liao X; Ringer SP; Primig S; Haghdadi N, 2024, 'Grain boundary network evolution in electron-beam powder bed fusion nickel-based superalloy Inconel 738', Journal of Alloys and Compounds, 972, pp. 172811,
    Journal articles | 2024
    Luo M; Rielli VV; Farabi E; Liao X; Ringer SP; Haghdadi N; Primig S, 2024, 'Grain boundary crystallography and segregation in Ni-based superalloy INC738 manufactured by electron-beam powder bed fusion in as-built and annealed conditions', Materials Characterization, 217, pp. 114421 - 114421,
    Journal articles | 2024
    Moyle MS; Haghdadi N; Luzin V; Salvemini F; Liao XZ; Ringer SP; Primig S, 2024, 'Correlation of microstructure, mechanical properties, and residual stress of 17-4 PH stainless steel fabricated by laser powder bed fusion', Journal of Materials Science and Technology, 198, pp. 83 - 97,
    Journal articles | 2024
    Moyle MS; Haghdadi N; Theska F; Haines MP; Liao XZ; Ringer SP; Primig S, 2024, 'Effect of compositional variations on the heat treatment response in 17-4 PH stainless steel fabricated by laser powder bed fusion', Materials Characterization, 209, pp. 113768,
    Journal articles | 2024
    Rielli VV; Contieri RJ; Primig S, 2024, 'Chemical origins of 尾-Ti stabilization via B4C additions in metastable 尾-Ti alloys and composites', Scientific Reports, 14, pp. 24666,
    Journal articles | 2024
    Rielli VV; Farabi E; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2024, '纬使 and 纬鈥 co-precipitation phenomena in directly aged Alloy 718 with high 未-phase fractions', Materials & Design, 241, pp. 112961 - 112961,
    Journal articles | 2024
    Rielli VV; Luo M; Farabi E; Haghdadi N; Primig S; Vieira Rielli V, 2024, 'Interphase boundary segregation in IN738 manufactured via electron-beam powder bed fusion', Scripta Materialia, 244, pp. 116033,
    Journal articles | 2024
    Rielli VV; Pham TD; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2024, 'Effects of standard heat treatment on micro-to nanostructure heterogeneities in a Rene 65 Ni-based superalloy billet', Materials Science and Engineering: A, 913, pp. 147069 - 147069,
    Journal articles | 2024
    Schulz B; Theska F; Leitner T; Hafok M; Primig S, 2024, 'Discontinuous 纬鈥 nucleation due to Boron and Carbon segregation in Ni-based superalloys', Journal of Alloys and Compounds, 1008, pp. 176459 - 176459,
    Journal articles | 2024
    Theska F; Primig S, 2024, 'Interfacial excess of solutes across phase boundaries using atom probe microscopy', Ultramicroscopy, 256, pp. 113885,
    Journal articles | 2024
    Wang H; Dong BS; Chen ZB; Liu JQ; Haghdadi N; Lu RQ; Primig S; Wang ZY; Pan ZX; Li HJ; Ringer SP; Liao XZ, 2024, 'Effect of compositional heterogeneity on the mechanical properties of a single-phase Cu-9Al alloy with different grain sizes', Acta Materialia, 263, pp. 119531,
    Journal articles | 2023
    Adomako NK; Haghdadi N; Dingle JFL; Kozeschnik E; Liao X; Ringer SP; Primig S, 2023, 'Predicting solid-state phase transformations during metal additive manufacturing: A case study on electron-beam powder bed fusion of Inconel-738', Additive Manufacturing, 76, pp. 103771,
    Journal articles | 2023
    Buerstmayr R; Theska F; Kozeschnik E; Webster RF; Lison-Pick M; Street S; Primig S, 2023, 'Investigation and Simulation of the Effects of nm-Scale 纬鈥 Precipitates on the Recrystallization of Ni-based Superalloys', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 54, pp. 2259 - 2276,
    Journal articles | 2023
    Farabi E; Klein T; Schnall M; Primig S, 2023, 'Effects of high deposition rate during cold metal transfer additive manufacturing on microstructure and properties of Ti-6Al-4V', Additive Manufacturing, 71,
    Journal articles | 2023
    Haines MP; Moyle MS; Rielli VV; Luzin V; Haghdadi N; Primig S; Vieira Rielli V, 2023, 'Experimental and computational analysis of site-specific formation of phases in laser powder bed fusion 17鈥4 precipitate hardened stainless steel', Additive Manufacturing, 73, pp. 103686,
    Journal articles | 2023
    Lim B; Nomoto K; Clarke AJ; Babu SS; Primig S; Liao X; Breen AJ; Ringer SP, 2023, 'On the interplay of internal voids, mechanical properties, and residual stresses in additively manufactured Haynes 282', Additive Manufacturing, 75, pp. 103749,
    Journal articles | 2023
    Primig S, 2023, 'On the Role of Interfaces During Metal Additive Manufacturing', Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada, 29, pp. 1420,
    Journal articles | 2023
    Rielli VV; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2023, 'On the control of nanoprecipitation in directly aged Alloy 718 via hot deformation parameters', Scripta Materialia, 226, pp. 115266,
    Journal articles | 2023
    Schulz B; Haghdadi N; Leitner T; Hafok M; Primig S, 2023, 'Advancing analytical electron microscopy methodologies to characterise microstructural features in superalloys', Ultramicroscopy, 247, pp. 113699,
    Journal articles | 2023
    Schulz B; Haghdadi N; Leitner T; Hafok M; Primig S, 2023, 'Dynamic recrystallisation via nucleation at distorted twins in a Ni-based superalloy', Journal of Alloys and Compounds, 936, pp. 168318,
    Journal articles | 2023
    Schulz B; Leitner T; Hafok M; Primig S, 2023, 'Advancements in processing of Ni-based superalloys by microstructure engineering via discontinuous 纬鈥 break-down', Materialia, 31, pp. 101873,
    Journal articles | 2023
    Schulz B; Leitner T; Primig S, 2023, 'In-situ observation of the incipient melting of borides and its effect on the hot-workability of Ni-based superalloys', Journal of Alloys and Compounds, 956, pp. 170324,
    Journal articles | 2023
    Theska F; Street SR; Lison-Pick M; Primig S, 2023, 'Grain boundary microstructure-property relationships in the cast & wrought Ni-based superalloy Ren茅 41 with boron and carbon additions', Acta Materialia, 258, pp. 119235,
    Journal articles | 2023
    Theska F; Tse WF; Schulz B; Buerstmayr R; Street SR; Lison-Pick M; Primig S, 2023, 'Review of Microstructure鈥揗echanical Property Relationships in Cast and Wrought Ni-Based Superalloys with Boron, Carbon, and Zirconium Microalloying Additions', Advanced Engineering Materials, 25,
    Journal articles | 2023
    Theska F; Webster RF; Street SR; Lison-Pick M; Primig S, 2023, 'Co-precipitation of M2B on ZrO2 in a Ni-base superalloy with B & Zr additions', Materials Chemistry and Physics, 310, pp. 128466,
    Journal articles | 2022
    Breen AJ; Day AC; Theska F; Lim B; Davids W; Primig S; Ringer SP, 2022, 'Expanding the Limits of Atom Probe Crystallographic Analysis', Microscopy and Microanalysis, 28, pp. 756 - 758,
    Journal articles | 2022
    Breen AJ; Theska F; Lim B; Primig S; Ringer SP, 2022, 'Advanced quantification of the site-occupancy in ordered multi-component intermetallics using atom probe tomography', Intermetallics, 145, pp. 107538,
    Journal articles | 2022
    Chakraborty A; Webster RF; Primig S, 2022, 'Lath martensite substructure evolution in low-carbon microalloyed steels', Journal of Materials Science, 57, pp. 10359 - 10378,
    Journal articles | 2022
    Gontijo M; Chakraborty A; Webster RF; Ilie S; Six J; Primig S; Sommitsch C, 2022, 'Thermomechanical and Microstructural Analysis of the Influence of B- and Ti-Content on the Hot Ductility Behavior of Microalloyed Steels', Metals, 12, pp. 1808,
    Journal articles | 2022
    Haghdadi N; Chen H; Chen Z; Babu S; Liao X; Ringer S; Primig S, 2022, 'Intergranular precipitation and chemical fluctuations in an additively manufactured 2205 duplex stainless steel', Scripta Materialia, 219, pp. 114894,
    Journal articles | 2022
    Haghdadi N; Ledermueller C; Chen H; Chen Z; Liu Q; Li X; Rohrer G; Liao X; Ringer S; Primig S, 2022, 'Evolution of microstructure and mechanical properties in 2205 duplex stainless steels during additive manufacturing and heat treatment', Materials Science and Engineering: A, 835, pp. 142695,
    Journal articles | 2022
    Haines MP; Rielli VV; Primig S; Haghdadi N, 2022, 'Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques', Journal of Materials Science, 57, pp. 14135 - 14187,
    Journal articles | 2022
    Hazarabedian MS; Haghdadi N; Primig S; Lison-Pick M; Quadir MZ; Ferry M; Iannuzzi M, 2022, 'Formation of intergranular phases in precipitation hardening nickel-based alloy 725', Acta Materialia, 236,
    Journal articles | 2022
    He XY; Wang H; Zhu ZG; Wang LZ; Liu JQ; Haghdadi N; Nai SML; Huang J; Primig S; Ringer SP; Liao XZ, 2022, 'Texture evolution in a CrMnFeCoNi high-entropy alloy manufactured by laser powder bed fusion', Journal of Materials Science, 57, pp. 9714 - 9725,
    Journal articles | 2022
    Jinschek J; Primig S; Proust G, 2022, 'Preface to the special issue: microstructure design in metal additive manufacturing鈥攑hysical metallurgy revisited', Journal of Materials Science, 57, pp. 9525 - 9526,
    Journal articles | 2022
    Kwabena Adomako N; Haghdadi N; Primig S; Adomako NK, 2022, 'Electron and laser-based additive manufacturing of Ni-based superalloys: A review of heterogeneities in microstructure and mechanical properties', Materials and Design, 223, pp. 111245,
    Journal articles | 2022
    Laleh M; Haghdadi N; Hughes AE; Primig S; Tan MYJ, 2022, 'Enhancing the repassivation ability and localised corrosion resistance of an additively manufactured duplex stainless steel by post-processing heat treatment', Corrosion Science, 198, pp. 110106,
    Journal articles | 2022
    Lim B; Chen H; Nomoto K; Chen Z; Saville AI; Vogel S; Clarke AJ; Paradowska A; Reid M; Primig S; Liao X; Babu SS; Breen AJ; Ringer SP, 2022, 'Additively manufactured Haynes-282 monoliths containing thin wall struts of varying thicknesses', Additive Manufacturing, 59, pp. 103120,
    Journal articles | 2022
    Moyle M; Ledermueller C; Zou Z; Primig S; Haghdadi N, 2022, 'Multi-scale characterisation of microstructure and texture of 316L stainless steel manufactured by laser powder bed fusion', Materials Characterization, 184, pp. 111663,
    Journal articles | 2022
    Moyle MS; Haghdadi N; Davids WJ; Liao XZ; Ringer SP; Primig S, 2022, 'Evidence of in-situ Cu clustering as a function of laser power during laser powder bed fusion of 17鈥4 PH stainless steel', Scripta Materialia, 219, pp. 114896,
    Journal articles | 2022
    Moyle MS; Haghdadi N; Liao XZ; Ringer SP; Primig S, 2022, 'On the microstructure and texture evolution in 17-4 PH stainless steel during laser powder bed fusion: Towards textural design', Journal of Materials Science and Technology, 117, pp. 183 - 195,
    Journal articles | 2022
    Nie S; Chin RL; Soufiani AM; Mehl T; Theska F; Haghdadi N; Primig S; Chan C; Trupke T; Hameiri Z, 2022, 'Temperature sensitivity maps of silicon wafers from photoluminescence imaging: The effect of gettering and hydrogenation', Progress in Photovoltaics: Research and Applications, 30, pp. 1298 - 1311,
    Journal articles | 2022
    Primig S, 2022, 'Editorial: The June 2022 cover paper', Journal of Materials Science, 57, pp. 9527 - 9529,
    Journal articles | 2022
    Rielli VV; Piglione A; Pham MS; Primig S; Vieira Rielli V, 2022, 'On the detailed morphological and chemical evolution of phases during laser powder bed fusion and common post-processing heat treatments of IN718', Additive Manufacturing, 50, pp. 102540,
    Journal articles | 2022
    Rielli VV; Theska F; Primig S, 2022, 'Correlative Approach for Atom Probe Sample Preparation of Interfaces Using Plasma Focused Ion Beam Without Lift-Out', Microscopy and Microanalysis, 28, pp. 998 - 1008,
    Journal articles | 2022
    Rielli VV; Theska F; Yao Y; Best JP; Primig S; Vieira Rielli V, 2022, 'Local composition and nanoindentation response of 未-phase and adjacent 纬鈥测-free zone in a Ni-based superalloy', Materials Research Letters, 10, pp. 301 - 309,
    Journal articles | 2022
    Theska F; Buerstmayr R; Liu H; Lison-Pick M; Street SR; Primig S, 2022, 'Influence of grain boundary precipitation and segregation on cracking of cast and wrought superalloys containing B and Zr', Materials Characterization, 187, pp. 111881,
    Journal articles | 2022
    Theska F; Yang Y; Sisco KD; Plotkowski A; Primig S, 2022, 'On the high-temperature stability of the Al8Cu3Ce intermetallic in an additively manufactured Al-Cu-Ce-Zr alloy', Materials Characterization, 191, pp. 112109,
    Journal articles | 2022
    Wang H; Chao Q; Chen HS; Chen ZB; Primig S; Xu W; Ringer SP; Liao XZ, 2022, 'Formation of a transition V-rich structure during the 伪' to 伪 + 尾 phase transformation process in additively manufactured Ti-6Al-4 V', Acta Materialia, 235, pp. 118104,
    Journal articles | 2022
    Wang H; Chao Q; Cui XY; Chen ZB; Breen AJ; Cabral M; Haghdadi N; Huang QW; Niu RM; Chen HS; Lim B; Primig S; Brandt M; Xu W; Ringer SP; Liao XZ, 2022, 'Introducing C phase in additively manufactured Ti-6Al-4V: A new oxygen-stabilized face-centred cubic solid solution with improved mechanical properties', Materials Today, 61, pp. 11 - 21,
    Journal articles | 2021
    Bahl S; Sisco K; Yang Y; Theska F; Primig S; Allard LF; Michi RA; Fancher C; Stump B; Dehoff R; Shyam A; Plotkowski A, 2021, 'Al-Cu-Ce(-Zr) alloys with an exceptional combination of additive processability and mechanical properties', Additive Manufacturing, 48, pp. 102404,
    Journal articles | 2021
    Buerstmayr R; Theska F; Webster R; Lison-Pick M; Primig S, 2021, 'Correlative analysis of grain boundary precipitates in Ni-based superalloy Ren茅 41', Materials Characterization, 178, pp. 111250,
    Journal articles | 2021
    Chakraborty A; Primig S, 2021, 'Influence of Finish Rolling Temperature and Molybdenum Addition on Strengthening of Low Carbon Niobium Steels鈥擜 Computational and Experimental Study', Steel Research International, 92,
    Journal articles | 2021
    Davids WJ; Chen H; Nomoto K; Wang H; Babu S; Primig S; Liao X; Breen A; Ringer SP, 2021, 'Phase transformation pathways in Ti-6Al-4V manufactured via electron beam powder bed fusion', Acta Materialia, 215, pp. 117131,
    Journal articles | 2021
    DeMott R; Haghdadi N; Gandomkar Z; Liao X; Ringer S; Primig S, 2021, 'Formation and 3D morphology of interconnected 伪 microstructures in additively manufactured Ti-6Al-4V', Materialia, 20,
    Journal articles | 2021
    DeMott R; Haghdadi N; Kong C; Gandomkar Z; Kenney M; Collins P; Primig S, 2021, '3D electron backscatter diffraction characterization of fine 伪 titanium microstructures: collection, reconstruction, and analysis methods', Ultramicroscopy, 230, pp. 113394,
    Journal articles | 2021
    DeMott R; Haghdadi N; Liao X; Ringer SP; Primig S, 2021, '3D characterization of microstructural evolution and variant selection in additively manufactured Ti-6Al-4听V', Journal of Materials Science, 56, pp. 14763 - 14782,
    Journal articles | 2021
    Haghdadi N; Laleh M; Chen H; Chen Z; Ledermueller C; Liao X; Ringer S; Primig S, 2021, 'On the pitting corrosion of 2205 duplex stainless steel produced by laser powder bed fusion additive manufacturing in the as-built and post-processed conditions', Materials and Design, 212, pp. 110260,
    Journal articles | 2021
    Haghdadi N; Laleh M; Moyle M; Primig S, 2021, 'Additive manufacturing of steels: a review of achievements and challenges', Journal of Materials Science, 56, pp. 64 - 107,
    Journal articles | 2021
    Laleh M; Hughes AE; Tan MY; Rohrer GS; Primig S; Haghdadi N, 2021, 'Grain boundary character distribution in an additively manufactured austenitic stainless steel', Scripta Materialia, 192, pp. 115 - 119,
    Journal articles | 2021
    Lim B; Chen H; Chen Z; Haghdadi N; Liao X; Primig S; Babu SS; Breen AJ; Ringer SP, 2021, 'Microstructure-property gradients in Ni-based superalloy (Inconel 738) additively manufactured via electron beam powder bed fusion', Additive Manufacturing, 46, pp. 102121,
    Journal articles | 2021
    Piglione A; Attard B; Vieira Rielli V; Santos Maldonado CT; Attallah MM; Primig S; Pham MS, 2021, 'On the constitutive relationship between solidification cells and the fatigue behaviour of IN718 fabricated by laser powder bed fusion', Additive Manufacturing, 47, pp. 102347,
    Journal articles | 2021
    Rielli VV; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2021, 'Effects of processing heterogeneities on the micro- to nanostructure strengthening mechanisms of an alloy 718 turbine disk', Materials and Design, 212, pp. 110295,
    Journal articles | 2021
    Rielli VV; Theska F; Godor F; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2021, 'Evolution of nanoscale precipitates during common Alloy 718 ageing treatments', Materials and Design, 205, pp. 109762,
    Journal articles | 2021
    Wang H; Chao Q; Yang L; Cabral M; Song ZZ; Wang BY; Primig S; Xu W; Chen ZB; Ringer SP; Liao XZ, 2021, 'Introducing transformation twins in titanium alloys: an evolution of 伪-variants during additive manufacturing', Materials Research Letters, 9, pp. 119 - 126,
    Journal articles | 2020
    DeMott R; Collins P; Kong C; Liao X; Ringer S; Primig S, 2020, '3D electron backscatter diffraction study of 伪 lath morphology in additively manufactured Ti-6Al-4V', Ultramicroscopy, 218, pp. 113073,
    Journal articles | 2020
    Eizadjou M; Chen H; Czettl C; Pachlhofer J; Primig S; Ringer SP, 2020, 'An observation of the binder microstructure in WC-(Co+Ru) cemented carbides using transmission Kikuchi diffraction', Scripta Materialia, 183, pp. 55 - 60,
    Journal articles | 2020
    Haghdadi N; DeMott R; Stephenson PL; Liao XZ; Ringer SP; Primig S, 2020, 'Five-parameter characterization of intervariant boundaries in additively manufactured Ti-6Al-4V', Materials and Design, 196, pp. 109177,
    Journal articles | 2020
    Haghdadi N; Primig S; Annasamy M; Cizek P; Hodgson PD; Fabijanic DM, 2020, 'Dynamic recrystallization in AlXCoCrFeNi duplex high entropy alloys', Journal of Alloys and Compounds, 830,
    Journal articles | 2020
    Haghdadi N; Primig S; Annasamy M; Cizek P; Hodgson PD; Fabijanic DM, 2020, 'On the hot-worked microstructure of a face-centered cubic Al0.3CoCrFeNi high entropy alloy', Scripta Materialia, 178, pp. 144 - 149,
    Journal articles | 2020
    Haghdadi N; Whitelock E; Lim B; Chen H; Liao X; Babu SS; Ringer SP; Primig S, 2020, 'Multimodal 纬鈥 precipitation in Inconel-738 Ni-based superalloy during electron-beam powder bed fusion additive manufacturing', Journal of Materials Science, 55, pp. 13342 - 13350,
    Journal articles | 2020
    Ledermueller C; Pratiwi HI; Webster RF; Eizadjou M; Ringer SP; Primig S, 2020, 'Microalloying effects of Mo versus Cr in HSLA steels with ultrafine-grained ferrite microstructures', Materials and Design, 185,
    Journal articles | 2020
    Ledermueller C; Zhu H; Li H; Primig S, 2020, 'An Initial Report on the Structure鈥揚roperty Relationships of a High-Strength Low-Alloy Steel Subjected to Advanced Thermomechanical Processing in Ferrite', Steel Research International, 91, pp. 1900596 - 1900596,
    Journal articles | 2020
    Small KA; Clayburn Z; DeMott R; Primig S; Fullwood D; Taheri ML, 2020, 'Interplay of dislocation substructure and elastic strain evolution in additively manufactured Inconel 625', Materials Science and Engineering: A, 785,
    Journal articles | 2020
    Stephenson PL; Haghdadi N; DeMott R; Liao XZ; Ringer SP; Primig S, 2020, 'Effect of scanning strategy on variant selection in additively manufactured Ti-6Al-4V', Additive Manufacturing, 36, pp. 101581,
    Journal articles | 2020
    Theska F; Nomoto K; Godor F; Oberwinkler B; Stanojevic A; Ringer SP; Primig S, 2020, 'On the early stages of precipitation during direct ageing of Alloy 718', Acta Materialia, 188, pp. 492 - 503,
    Journal articles | 2020
    Theska F; Stanojevic A; Oberwinkler B; Primig S, 2020, 'Microstructure-property relationships in directly aged Alloy 718 turbine disks', Materials Science and Engineering: A, 776,
    Journal articles | 2020
    Wang H; Zhu ZG; Chen H; Wang AG; Liu JQ; Liu HW; Zheng RK; Nai SML; Primig S; Babu SS; Ringer SP; Liao XZ, 2020, 'Effect of cyclic rapid thermal loadings on the microstructural evolution of a CrMnFeCoNi high-entropy alloy manufactured by selective laser melting', Acta Materialia, 196, pp. 609 - 625,
    Journal articles | 2019
    Chen H; Cooper C; Durrant C; Li Y; Primig S; Liao X; Babu SS; Ringer SP, 2019, 'Graded Microstructure of Additive Manufactured Ti-6Al-4V via Electron Beam Melting', Microscopy and Microanalysis, 25, pp. 498 - 499,
    Journal articles | 2019
    Hollerweger R; Riedl H; Arndt M; Kolozsvari S; Primig S; Mayrhofer PH, 2019, 'Guidelines for increasing the oxidation resistance of Ti-Al-N based coatings', Thin Solid Films, 688,
    Journal articles | 2019
    Ledermueller C; Kozeschnik E; Webster RF; Primig S, 2019, 'Advanced Thermo-mechanical Process for Homogenous Hierarchical Microstructures in HSLA Steels', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50, pp. 5800 - 5815,
    Journal articles | 2019
    Theska F; Ceguerra AV; Turk C; Breen AJ; Ringer SP; Primig S, 2019, 'Correlative study of lattice imperfections in long-range ordered, nano-scale domains in a Fe-Co-Mo alloy', Ultramicroscopy, 204, pp. 91 - 100,
    Journal articles | 2019
    Theska F; Ringer SP; Primig S, 2019, 'Atom Probe Microscopy of Strengthening Effects in Alloy 718', Microscopy and Microanalysis, 25, pp. 470 - 480,
    Journal articles | 2019
    Wang H; Zhu ZG; Chen HS; Nai SM; An XH; Zheng RK; Primig S; Ringer SP; Liao XZ, 2019, 'Effect of Cyclic Thermal Loadings on the Microstructural Evolution of a Cantor Alloy in 3D Printing Processes', Microscopy and Microanalysis, 25, pp. 2568 - 2569,
    Journal articles | 2018
    Drexler A; Oberwinkler B; Primig S; Turk C; Povoden-Karadeniz E; Heinemann A; Ecker W; Stockinger M, 2018, 'Experimental and numerical investigations of the 纬鈥 and 纬鈥 precipitation kinetics in Alloy 718', Materials Science and Engineering: A, 723, pp. 314 - 323,
    Journal articles | 2018
    Ledermueller C; Li H; Primig S, 2018, 'Engineering Hierarchical Microstructures via Advanced Thermo-Mechanical Processing of a Modern HSLA Steel', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49, pp. 6337 - 6350,
    Journal articles | 2018
    Leitner K; Scheiber D; Jakob S; Primig S; Clemens H; Povoden-Karadeniz E; Romaner L, 2018, 'How grain boundary chemistry controls the fracture mode of molybdenum', Materials and Design, 142, pp. 36 - 43,
    Journal articles | 2018
    Maric M; Mur谩nsky O; Karatchevtseva I; Ung谩r T; Hester J; Studer A; Scales N; Rib谩rik G; Primig S; Hill MR; Muransky O, 2018, 'The effect of cold-rolling on the microstructure and corrosion behaviour of 316L alloy in FLiNaK molten salt', Corrosion Science, 142, pp. 133 - 144,
    Journal articles | 2018
    Schulz B; Andersen HL; Al Bahri OK; Johannessen B; Liu J; Primig S; Sharma N, 2018, 'Electrochemical performance and structure of Al2W3-: XMoxO12', CrystEngComm, 20, pp. 1352 - 1360,
    Journal articles | 2018
    Theska F; Stanojevic A; Oberwinkler B; Ringer SP; Primig S, 2018, 'On conventional versus direct ageing of Alloy 718', Acta Materialia, 156, pp. 116 - 124,
    Journal articles | 2018
    Hofer C; Bliznuk V; Verdiere A; Petrov R; Winkelhofer F; Clemens H; Primig S, 2018, 'High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel', ,
    Journal articles | 2017
    Ahmadi MR; Rath M; Povoden-Karadeniz E; Primig S; Wojcik T; Danninger A; Stockinger M; Kozeschnik E, 2017, 'Modeling of precipitation strengthening in Inconel 718 including non-spherical 纬" precipitates', Modelling and Simulation in Materials Science and Engineering, 25, pp. 055005,
    Journal articles | 2017
    Breen AJ; Babinsky K; Day AC; Eder K; Oakman CJ; Trimby PW; Primig S; Cairney JM; Ringer SP, 2017, 'Correlating Atom Probe Crystallographic Measurements with Transmission Kikuchi Diffraction Data', Microscopy and Microanalysis, 23, pp. 279 - 290,
    Journal articles | 2017
    Hofer C; Primig S; Clemens H; Winkelhofer F; Schnitzer R, 2017, 'Influence of Heat Treatment on Microstructure Stability and Mechanical Properties of a Carbide-Free Bainitic Steel', Advanced Engineering Materials, 19,
    Journal articles | 2017
    Lang D; Povoden-Karadeniz E; Schatte J; Knabl W; Clemens H; Primig S, 2017, 'Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities', Journal of Alloys and Compounds, 695, pp. 372 - 381,
    Journal articles | 2017
    Leitner (n茅e Babinsky) K; Felfer PJ; Holec D; Cairney J; Knabl W; Lorich A; Clemens H; Primig S, 2017, 'On grain boundary segregation in molybdenum materials', Materials and Design, 135, pp. 204 - 212,
    Journal articles | 2017
    Primig S; Stechauner G; Kozeschnik E, 2017, 'Early Stages of Cu Precipitation in 15鈥5 PH Maraging Steel Revisited 鈭 Part I: Experimental Analysis', Steel Research International, 88,
    Journal articles | 2017
    Ragger KS; Primig S; Daniel R; Kaiser R; Paal J; Mitterer C; Buchmayr B, 2017, 'Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains', Materials Characterization, 128, pp. 257 - 268,
    Journal articles | 2017
    Stechauner G; Primig S; Kozeschnik E, 2017, 'Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited 鈥 Part II: Thermokinetic Simulation', Steel Research International, 88,
    Journal articles | 2017
    Turk C; Leitner H; Schemmel I; Clemens H; Primig S, 2017, 'Atom probe study of B2 order and A2 disorder of the FeCo matrix in an Fe-Co-Mo-alloy', Micron, 98, pp. 24 - 33,
    Journal articles | 2017
    Verdiere A; Hofer C; De Waele S; Bliznuk V; Primig S; Cottenier S; Tran MD; Pennings B; Kestens LAI; Petrov RH, 2017, 'Precipitation in simultaneously nitrided and aged Mo-containing maraging steel', Materials Characterization, 131, pp. 21 - 30,
    Journal articles | 2016
    Babinsky K; Primig S; Knabl W; Lorich A; Stickler R; Clemens H, 2016, 'Fracture Behavior and Delamination Toughening of Molybdenum in Charpy Impact Tests', JOM, 68, pp. 2854 - 2863,
    Journal articles | 2016
    Hofer C; Bliznuk V; Verdiere A; Petrov R; Winkelhofer F; Clemens H; Primig S, 2016, 'Correlative microscopy of a carbide-free bainitic steel', Micron, 81, pp. 1 - 7,
    Journal articles | 2016
    Hofer C; Winkelhofer F; Clemens H; Primig S, 2016, 'Morphology change of retained austenite during austempering of carbide-free bainitic steel', Materials Science and Engineering: A, 664, pp. 236 - 246,
    Journal articles | 2016
    Lang D; Karge L; Schatte J; Gilles R; Dallinger R; Wei脽ensteiner I; Staron P; Knabl W; Primig S; Clemens H, 2016, 'Evolution of strain-induced hafnium carbides in a molybdenum base Mo鈥揌f鈥揅 alloy studied by small-angle neutron scattering and complementary methods', Journal of Alloys and Compounds, 688, pp. 619 - 631,
    Journal articles | 2016
    Lang D; P枚hl C; Holec D; Schatte J; Povoden-Karadeniz E; Knabl W; Clemens H; Primig S, 2016, 'On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy', Journal of Alloys and Compounds, 654, pp. 445 - 454,
    Journal articles | 2016
    Sackl S; Leitner H; Clemens H; Primig S, 2016, 'On the evolution of secondary hardening carbides during continuous versus isothermal heat treatment of high speed steel HS 6-5-2', Materials Characterization, 120, pp. 323 - 330,
    Journal articles | 2016
    Sackl S; Zuber M; Clemens H; Primig S, 2016, 'Induction Tempering vs Conventional Tempering of a Heat-Treatable Steel', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47, pp. 3694 - 3702,
    Journal articles | 2016
    Turk C; Leitner H; Kellezi G; Clemens H; Gan WM; Staron P; Primig S, 2016, 'Impact of the B2 ordering behavior on the mechanical properties of a FeCoMo alloy', Materials Science and Engineering: A, 662, pp. 511 - 518,
    Journal articles | 2015
    Babinsky K; Knabl W; Lorich A; De Kloe R; Clemens H; Primig S, 2015, 'Grain boundary study of technically pure molybdenum by combining APT and TKD', Ultramicroscopy, 159, pp. 445 - 451,
    Journal articles | 2015
    Haslberger P; Turk C; Babinsky K; Caliskanoglu D; Clemens H; Primig S, 2015, 'Boron Grain Boundary Segregation in a Heat Treatable Steel', BHM Berg- und H眉ttenm盲nnische Monatshefte, 160, pp. 204 - 208,
    Journal articles | 2015
    Hofer C; Clemens H; Primig S, 2015, 'Preparation of carbide-free bainitic steels for EBSD investigations', Praktische Metallographie/Practical Metallography, 52, pp. 384 - 395
    Journal articles | 2015
    Hofer C; Leitner H; Winkelhofer F; Clemens H; Primig S, 2015, 'Structural characterization of "carbide-free" bainite in a Fe-0.2C-1.5Si-2.5Mn steel', Materials Characterization, 102, pp. 85 - 91,
    Journal articles | 2015
    Lang D; Schatte J; Knabl W; Clemens H; Primig S, 2015, 'Texture Evolution during Deformation of a Mo-Hf-C Alloy Studied with Electron Backscatter Diffraction', BHM Berg- und H眉ttenm盲nnische Monatshefte, 160, pp. 226 - 230,
    Journal articles | 2015
    Lang D; Schatte J; Knabl W; Dallinger R; Clemens H; Primig S, 2015, 'Evolution of strain-induced precipitates in a molybdenum base MO-HF-C alloy', Advances in Powder Metallurgy and Particulate Materials - Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2015
    Journal articles | 2015
    Lang D; Schatte J; Knabl W; Dallinger R; Clemens H; Primig S, 2015, 'Evolution of strain-induced precipitates in a molybdenum-base Mo-Hf-C alloy', International Journal of Powder Metallurgy, 51, pp. 21 - 25
    Journal articles | 2015
    Mayer S; Hawranek G; Mendez-Martin F; Panzenb枚ck M; P枚lzl S; Primig S; Rashkova B; Clemens H, 2015, 'The role of metallography in the development and characterization of high-performance materials', Praktische Metallographie/Practical Metallography, 52, pp. 59 - 74,
    Journal articles | 2015
    Primig S; Clemens H; Knabl W; Lorich A; Stickler R, 2015, 'Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum', International Journal of Refractory Metals and Hard Materials, 48, pp. 179 - 186,
    Journal articles | 2015
    Primig S, 2015, 'Advanced Structure-Property Relationships: Made in Styria!', BHM Berg- und H眉ttenm盲nnische Monatshefte, 160, pp. 203 - 203,
    Journal articles | 2015
    Sackl S; Clemens H; Primig S, 2015, 'Investigation of the self tempering effect of martensite by means of atom probe tomography', Praktische Metallographie/Practical Metallography, 52, pp. 374 - 383,
    Journal articles | 2015
    Turk C; Kellezi G; Leitner H; Clemens H; Primig S, 2015, 'Influence of the sample preparation technique on the 渭 phase fraction analysis in a Fe-25Co-15Mo alloy by means of XRD', Praktische Metallographie/Practical Metallography, 52, pp. 323 - 333,
    Journal articles | 2014
    Babinsky K; De Kloe R; Clemens H; Primig S, 2014, 'A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction', Ultramicroscopy, 144, pp. 9 - 18,
    Journal articles | 2014
    Babinsky K; Knabl W; Lorich A; De Kloe R; Clemens H; Primig S, 2014, 'Grain boundary study of technically pure molybdenum by combining APT and TKD', Ultramicroscopy,
    Journal articles | 2014
    Babinsky K; Weidow J; Knabl W; Lorich A; Leitner H; Primig S, 2014, 'Atom probe study of grain boundary segregation in technically pure molybdenum', Materials Characterization, 87, pp. 95 - 103,
    Journal articles | 2014
    Hollerweger R; Riedl H; Paulitsch J; Arndt M; Rachbauer R; Polcik P; Primig S; Mayrhofer PH, 2014, 'Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings', Surface and Coatings Technology, 257, pp. 78 - 86,
    Journal articles | 2014
    Lang D; P枚hl C; Schatte J; Primig S; Leitner H, 2014, 'On the precipitation mechanism in the molybdenum based alloy MHC (Mo-Hf-C)', Powder Metallurgy, 57, pp. 311 - 313,
    Journal articles | 2014
    N枚hrer M; Mayer W; Primig S; Zamberger S; Kozeschnik E; Leitner H, 2014, 'Influence of deformation on the precipitation behavior of Nb(CN) in austenite and ferrite', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45, pp. 4210 - 4219,
    Journal articles | 2014
    Primig S; Leitner H; Kozeschnik E, 2014, 'Fr眉he Stadien der Ausscheidungsbildung 鈥 Experimente und Modellierung', BHM Berg- und H眉ttenm盲nnische Monatshefte, 159, pp. 5 - 11,
    Journal articles | 2014
    Ressel G; Parz P; Primig S; Leitner H; Clemens H; Puff W, 2014, 'New findings on the atomistic mechanisms active during mechanical milling of a Fe-Y2O3 model alloy', Journal of Applied Physics, 115,
    Journal articles | 2014
    Ressel G; Primig S; Leitner H, 2014, 'The effect of zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45, pp. 1552 - 1558,
    Journal articles | 2014
    Sackl S; Leitner H; Zuber M; Clemens H; Primig S, 2014, 'Induction Hardening vs Conventional Hardening of a Heat Treatable Steel', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45, pp. 5657 - 5666,
    Journal articles | 2014
    Sackl S; Leitner H; Zuber M; Clemens H; Primig S, 2014, 'Induction Hardening vs Conventional Hardening of a Heat Treatable Steel', Metallurgical and Materials Transactions A,
    Journal articles | 2014
    Zacharias H; Arndt J; Primig S, 2014, 'Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbest盲ndigkeit von Einsatzst盲hlen vom Typ 18CrNiMo7鈭6', BHM Berg- und H眉ttenm盲nnische Monatshefte, 159, pp. 296 - 297,
    Journal articles | 2013
    N枚hrer M; Zamberger S; Primig S; Leitner H, 2013, 'Atom probe study of vanadium interphase precipitates and randomly distributed vanadium precipitates in ferrite', Micron, 54-55, pp. 57 - 64,
    Journal articles | 2013
    Ressel G; Primig S; Leitner H, 2013, 'The evolution of y distribution during the processing route of mechanically alloyed iron studied by means of atom probe tomography', International Journal of Materials Research, 104, pp. 1088 - 1095,
    Journal articles | 2012
    Primig S; Leitner H; Knabl W; Lorich A; Clemens H; Stickler R, 2012, 'Influence of the heating rate on the recrystallization behavior of molybdenum', Materials Science and Engineering: A, 535, pp. 316 - 324,
    Journal articles | 2012
    Primig S; Leitner H; Knabl W; Lorich A; Clemens H; Stickler R, 2012, 'Textural evolution during dynamic recovery and static recrystallization of molybdenum', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43, pp. 4794 - 4805,
    Journal articles | 2012
    Primig S; Leitner H; Knabl W; Lorich A; Stickler R, 2012, 'Static recrystallization of molybdenum after deformation below 0.5*TM (K)', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43, pp. 4806 - 4818,
    Journal articles | 2011
    Primig S; Leitner H; Lorich A; Knabl W; Clemens H; Stickler R, 2011, 'SEM and TEM investigations of recovery and recrystallization in technically pure molybdenum', Praktische Metallographie/Practical Metallography, 48, pp. 344 - 355,
    Journal articles | 2011
    Primig S; Leitner H, 2011, 'Separation of overlapping retained austenite decomposition and cementite precipitation reactions during tempering of martensitic steel by means of thermal analysis', Thermochimica Acta, 526, pp. 111 - 117,
    Journal articles | 2010
    Primig S; Leitner H; Clemens H; Lorich A; Knabl W; Stickler R, 2010, 'On the recrystallization behavior of technically pure molybdenum', International Journal of Refractory Metals and Hard Materials, 28, pp. 703 - 708,
    Journal articles | 2010
    Primig S; Leitner H; Clemens H; Stickler R; Lorich A; Knabl W; K枚ck W, 2010, 'Recovery and Recrystallization Behavior of Technically Pure Molybdenum', BHM Berg- und H眉ttenm盲nnische Monatshefte, 155, pp. 20 - 25,
    Journal articles | 2010
    Primig S; Leitner H, 2010, 'Transformation from continuous-to-isothermal aging applied on a maraging steel', Materials Science and Engineering: A, 527, pp. 4399 - 4405,
  • Preprints | 2022
    K眉hbach M; Rielli VV; Primig S; Saxena A; Mayweg D; Jenkins B; Antonov S; Reichmann A; Kardos S; Romaner L; Brockhauser S, 2022, On Strong-Scaling and Open-Source Tools for High-Throughput Quantification of Material Point Cloud Data: Composition Gradients, Microstructural Object Reconstruction, and Spatial Correlations,
    Preprints | 2021
    Theska F; Nomoto K; Godor F; Oberwinkler B; Stanojevic A; Ringer SP; Primig S, 2021, On the early stages of precipitation during direct ageing of Alloy 718, ,
    Conference Papers | 2015
    Hofer C; Winkelhofer F; Krammerbauer J; Clemens H; Primig S, 2015, 'Atom probe tomography of carbides occurring in "carbide-free" bainitic steels', in Materials Today: Proceedings, pp. S925 - S928,
    Conference Papers | 2015
    Mayer W; Sackl S; Shan YV; Primig S; Kozeschnik E, 2015, 'Evolution of precipitates and martensite substructure during continuous heat treatment', pp. S619 - S622,
    Conference Papers | 2015
    Primig S; Stechauner G; Kozeschnik E, 2015, 'Early stages of Cu precipitation in 15-5 PH maraging steel revisited - Experiments and modelling', in PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, pp. 169 - 170
    Conference Papers | 2015
    Sackl S; Kellezi G; Leitner H; Clemens H; Primig S, 2015, 'Comparison of continuous and isothermal tempering of a high speed steel', in PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, pp. 99 - 100
    Conference Papers | 2015
    Sackl S; Kellezi G; Leitner H; Clemens H; Primig S, 2015, 'Martensitic transformation of a high-speed tool steel during continuous heat treatment', pp. S635 - S638,
    Conference Papers | 2015
    Turk C; Kellezi G; Leitner H; Staron P; Gan W; Clemens H; Primig S, 2015, 'B2 order transformation in a Fe - 25 at% Co - 9 at% Mo alloy', in Materials Research Society Symposium Proceedings, pp. 175 - 180,
    Preprints | 2014
    Hollerweger R; Riedl H; Paulitsch J; Arndt M; Rachbauer R; Polcik P; Primig S; Mayrhofer PH, 2014, Origin of High Temperature Oxidation Resistance of Ti-Al-Ta-N Coatings, ,
    Conference Papers | 2014
    Primig S; Ragger KS; Buchmayr B, 2014, 'EBSD study of the microstructural evolution during hot compression testing of a superduplex steel', in Advanced Materials Research, pp. 973 - 979,
    Conference Papers | 2014
    Primig S; Ragger KS; Buchmayr B, 2014, 'EBSD study of the microstructural evolution during hot compression testing of a superduplex steel', in Materials Science Forum, pp. 973 - 979,
    Conference Papers | 2014
    Ressel G; Parz P; Fian A; Holec D; Primig S; Puff W; Leitner H; Clemens H, 2014, 'On the behavior of yttria/yttrium during mechanical alloying of a Fe - Y2O3 model alloy system', in Advanced Materials Research, pp. 598 - 603,
    Preprints |
    Breen A; Theska F; Lim B; Primig S; Ringer SP, Advanced Quantification of the Site-Occupancy in Ordered Multi-Component Intermetallics Using Atom Probe Tomography,

Selected recent grants:

S. Primig
Australian Research Council Future Fellowship (FT240100398)
'Encoding 3D microstructural gradients via metal additive manufacturing'

S. Primig, S. Street
Australian Research Council Linkage Project (LP230100155)
'Sustainable and robust Australian Ni-based superalloy manufacturing'

S. Primig, N. Haghdadi
Australian Research Council Discovery Project (DP230101063)
'In-situ grain boundary engineering during metal additive manufacturing'

S. Primig, S.P. Ringer, B. Oberwinkler
Australian Research Council Linkage Project (LP190101169)
鈥歋tructure-property relationships of next generation aero-engine materials鈥

S.P. Ringer, S. Primig, C. Czettl
Australian Research Council Linkage Project (LP190100850)
'Advanced hard metals: microstructure-property-processing relationships'

M. Ferry, S. Primig, N. Birbilis, P. Nakashima
Australian Research Council Discovery Project (DP190103592)
'Unlocking the diverse property profile of ultra-lightweight magnesium alloys'

S. Primig
Australian Research Council Linkage Project (LP180100144)
'Advancing the Australian Specialty Alloy Processing Capability'

S.P. Ringer, X. Liao, S. Primig
AUSMURI program, Department of Industry, Innovation & Science, Australia (AUSMURI000005)
'Rationalization of Liquid/Solid and Solid/Solid Interphase Instabilities During Thermal-Mechanical Transients of Metal Additive Manufacturing'

S. Primig
Australian Research Council DECRA Fellowship (DE180100440)
'Engineering hierarchical microstructures in high strength low alloy steels'

Industry grants and consulting with Australian and international manufacturers

  • ARC Future听Fellowship (2024)
  • Dean of Science Research Excellence Staff Award (2022)
  • Postgraduate Research Supervisor Award (2021)
  • Dean of Science Collaboration & Partnership Award (2020)
  • Future Women Leaders Conference Award, Monash University (2019)
  • UNSW Scientia Fellowship听(2019)
  • Postgraduate Research Supervisor Award (2018)
  • ARC DECRA Fellowship (2018)

  • TMS Phase Transformations Committee Chair (2024听- current, Vice Chair 2022-2024)
  • Thermec Scientific and Executive听Committees (2018 - current)
  • TMS Phase Transformations Committee (2018 - current)
  • TMS (2017 - current)
  • Certified Materials Professional (CMatP), Materials Australia (2016 - current)
  • Australian Microscopy & Microanalysis Society (2015 - current)
  • NSW branch president of听MaterialsAustralia听(2019听- 2021)
  • NSW councillor and branch secretary of Materials Australia (2015 - 2023)

My Research Supervision

My Teaching

  • MATS3003: Engineering in Process Metallurgy (2015 - current)
  • MATS2004: Mechanical Behaviour of Materials听(2021听- 2023)
  • MATS1192: Design and Application of Materials in Science and Engineering (2017 - 2018)
  • MATS6002: Materials Design (2015 - 2017)
  • Metallurgy for the Non-Metallurgistfor Materials Australia NSW (2016 - 2020)
  • Pre-UNSW teaching contributions at Montanuniversitaet Leoben (Austria, 2009 - 2015):
    Lecturing and lab demonstration in Physical Metallurgy, Mechanics &听Testing of Materials, Advanced Materials Characterisation, and Failure Analysis