91³ÉÈ˰涶Òô
Engineering Mechanical and Manufacturing Engineering

MME purchasing/ obtaining samples procedure

Personalise
Mechanical engineer looking at engine

MME purchasing procedure

ALL Lab related purchases: contact your technical staff (listÌýhere) or Tamsin Peters:ÌýTamsin.peters@unsw.edu.au

Other purchases: contactÌýmech.admin@unsw.edu.au

Procedure

Send a purchase request email to yourÌýTechnical StaffÌý(for lab-related purchases) orÌýmech.admin@unsw.edu.auÌý(if not lab-related) with the following details:

  • Relevant safety forms or approvals as attachments (as per point 2 below)
  • Details of your purchase request in theÌýtableÌýformat (as per point 4 below)
  • A formal quotation if the purchase is not from one of UNSW’s hosted catalogue suppliers (as per point 3 below)
  • Email from cost centre supervisor (if you are not the account holder) approving the purchase from the provided cost centre

Instructions

1. If the purchase is lab-related, discuss with your technical staff first.ÌýÌý

2. Prepare any relevant safety forms and/or approvals:

Substances/chemical:

Lab equipment:

Lab consumables:

  • Supervisor approval if student

3. Select a supplier

Ìýa) Try to buy from UNSW hosted catalogues first – see list below:

Ìý³§³Ü±è±è±ô¾±±ð°ù

Ìý°Â±ð²ú²õ¾±³Ù±ð

Ìý²Ñ±ð°ù³¦°ì

Ìý³§¾±²µ³¾²¹-´¡±ô»å°ù¾±³¦³ó

ÌýThermo Fischer

ÌýLife Technology

Ìý

ÌýInterpath Services

Ìý

ÌýQiagen

Ìý

ÌýGeneSearch

Ìý

ÌýAbcam Australia

Ìý

ÌýChem-Supply

ÌýRowe Scientific

ÌýBio-Strategy

ÌýBio-Rad Laboratories

Ìý

ÌýScientifix

Ìý

ÌýLivingstone International

Ìý

ÌýJohn Morris

Ìý

ÌýRS Components

ÌýJ.Blackwood & Son

b)Ìý If purchase request isÌýnotÌýfrom a UNSW hosted catalogue, then please obtain a formal quotation from the supplier including the following details:Ìý

  • Company letterhead
  • ABN number if Australian Company (should appear on letterhead)
  • Company Address (should appear on Letterhead)
  • Email address of Company so that we can email the Purchase order to company (should be on letterhead)

Location of Delivery:

Name/ c/o- Technical or Admin Staff name

School of Mechanical and Manufacturing Engineering, UNSW

Room 120, Willis Annexe - building J18 (south end, use ramp)

Via Gate 14 Barker Street,

UNSW, Kensington, Sydney, NSW, 2052Ìý

  • Itemised with relevant costs
  • Freight and shipping charges and details
  • Payment terms i.e. COD or 30 days payment
  • What currency if company is not in Australia
  • Note that Customs clearance costs may apply for any equipment when purchasing from a vendor outside Australia.

Ensure quotation is current

4. Fill out aÌýtableÌýwith the details of your purchase (copy the table from theÌýlink) and include it in your email purchase request.Ìý

5. Send a purchase request email to yourÌýTechnical StaffÌý(for lab-related purchases) orÌýmech.admin@unsw.edu.auÌý(if not lab-related) with the following detail

  • Relevant safety forms or approvals as attachments (as per point 2 above)
  • Details of your purchase request in the table format above (as per point 4 above)
  • A formal quotation if the purchase is not from one of UNSW’s hosted catalogue suppliers (as per point 3 above)
  • Email from cost centre supervisor (if you are not the account holder) approving the purchase from the provided cost centre

A sample might be a material, substance, device, or equipment of any nature that might has been gifted, donated, or loaned to be used in MME labs by any lab user e.g. Staff, student, visitor, contractor...etc.

MME sample hazard declaration procedures

Are you getting any sample(s)* from outside of UNSW or another UNSW school/facility?

If you are getting a sample from any location, source or supplier and this sample didn’t go through the normalÌýMME purchase processÌý( not paid for) you must complete this form for any samples brought to our MME laboratories for testing. It is important that laboratory staff are made aware of any potential hazards associated with the handling, preparation and testing of the samples. This form is to be completed before delivering samples to MME laboratories

  1. Please download theÌýMME Sample Hazard Declaration Form, send it to the sample supplier to fill and sign it, you may also add as much details as you can before or after the supplier input.
  2. Obtain the signature of "Person Authorising Testing" (the manager for professional staff,Ìýacademic supervisor for students and research associate/fellowsÌýORÌýthe HoS for all other academics)
  3. You will sign as the person receiving the sample in the "Received By" field
  4. Send it to the relevantÌýTechnical StaffÌý member who is the main contact for labs you want to store and/or do your test in.
  5. Please consider that you might need to provide further safety forms and/or approvals as below

For Substances/chemical:

For Lab equipment: